RD_2T=RD_2T_0, VREFSTAT=VREFSTAT_0, IREFSTAT=IREFSTAT_0, TRIMSTAT=TRIMSTAT_0, PSTAT=PSTAT_0, LDOSTAT=LDOSTAT_0
Power Status Register
PSTAT | Flash power status 0 (PSTAT_0): Flash IP in power-down mode 1 (PSTAT_1): Flash IP Vdd domain power-up in progress 2 (PSTAT_2): PSS LDO_GOOD, IREF_OK and VREF_OK check in progress 3 (PSTAT_3): Flash IP SAFE_LV check in progress 4 (PSTAT_4): Flash IP Active 5 (PSTAT_5): Flash IP Active in Low-Frequency Active and Low-Frequency LPM0 modes. 6 (PSTAT_6): Flash IP in Standby mode 7 (PSTAT_7): Flash IP in Current mirror boost state |
LDOSTAT | PSS FLDO GOOD status 0 (LDOSTAT_0): FLDO not GOOD 1 (LDOSTAT_1): FLDO GOOD |
VREFSTAT | PSS VREF stable status 0 (VREFSTAT_0): Flash LDO not stable 1 (VREFSTAT_1): Flash LDO stable |
IREFSTAT | PSS IREF stable status 0 (IREFSTAT_0): IREF not stable 1 (IREFSTAT_1): IREF stable |
TRIMSTAT | PSS trim done status 0 (TRIMSTAT_0): PSS trim not complete 1 (TRIMSTAT_1): PSS trim complete |
RD_2T | Indicates if Flash is being accessed in 2T mode 0 (RD_2T_0): Flash reads are in 1T mode 1 (RD_2T_1): Flash reads are in 2T mode |